[MercMan007]

Quote: Originally Posted by Shooop

People recommend burning at 2x - 4x. I burn at 6x. NSMB has Nintendo's new copyright protection on it so I wouldn't recommend using that to test if you softmodded correctly and all wii games come out to 4.37 Gb.

Now you tell me...

guess I better try a different title.

[MercMan007]

I'm good to go! NSMB works as well.

[femr2]

Quote: Originally Posted by Shooop

I'm guessing you did not remove the ios stubs and install the cios correctly.

Yup. Went back and found I had to use the second option at this point...

Quote: Originally Posted by bigstump

Now to get rid of the evil ios249, download this

http://www.4shared.com/file/140287685/1b856aef/2nd_Uninstall_stub_ios36_inc.html

If you get errors with the above link use this One

http://www.4shared.com/file/141232574/f253278/To_Remove_IOS36.html

The procedure afterwards is not exactly the same as for the first option, but it did the trick. Up and running with Configurable USB Loader on fat32 with a poxy D3-2. Nice.

Probably due to me having 4.2e rather than 4.2u ?

Thanks for the nudge.

[Shooop]

No problem.

[Ruben_Potpants]

Hey all.

First, I want to say thank you to stumps, AWESOME tut!

Second, I need help. I cant get the 4th set of files to DL, that would be the backup loader pack. Can anyone help me out? Maybe another direct link, or someone can send me the files directly?

Thanks
Ruben

[Shooop]

@ Ruben_Potpants

Wad Manager 1.4:

http://www.mediafire.com/?scwhmzam1mn

Neogamma R7:

http://www.mediafire.com/?cmzmyzoy2hm

[Ruben_Potpants]

Thanks Shooop, I have another couple questions. In the readme it says

"[ HOW TO USE ]:

1. Create a folder called "wad" in the root of the storage device.
2. Copy all the WAD packages in the folder created in the step 1.
3. Run the application with any method to load homebrew."

Where are the WAD packages I need to copy?
I put the SD card in, and start my homebrew channel, but there is no buttons or anything on the homebrew channel, just bubbles. Did I do somethin wrong?

Ruben

[Shooop]

The Wad Manager 1.4 should have a boot.dol file. Make a folder named "Wad Manager 1.4" and put boot.dol inside. Put that folder inside a folder named "apps" that should be in the root of your SD card. Now you should see Wad Manager 1.4 in the Homebrew Channel. In the root of your SD card, create a folder named "wad" and place the Neogamma R7 wad inside. Now use Wad Manager 1.4 from the Homebrew Channel to install the Neogamma R7 channel.

[Ruben_Potpants]

Right on Shooop, thank you!! I got the WAD Manager to work. Now I get an error when installing backup launcher ng r7.wad

"ERROR! (ret=-1022)
press any button to continue"

I press A and it takes me back to the"available WAD files on device"

Any idears?

Thanks again
Ruben

[Shooop]

Try this:

http://www.wiihacks.com/general-homebrew-hack-issues/13606-ios-downgrader-error-ret-1022-a.html#post84684

[Ruben_Potpants]

Thanks yet again.

No love, still the same error. It un-installs with no errors, then I try to re-install and I get the same error. Ill do some research, and check back in a bit.

Thanks
Ruben

[sevets]

Thanks to bigstump for the original post. I am almost all the way through, but cannot quite get the last step:

Like a few others, I am getting stuck on the last step. When I am trying to load WAD manager 1.4, select the IOS249 version, Wii SD Slot, then press A, the message "[+] Mounting device, please wait..." comes up, my remote shuts off, and the screen is stuck there.

All steps seem to work OK...the exception is step #3, it completes OK but does throw one error, ret = -1035.

Any suggestions? Help is appreciated...

[Shooop]

If you are stuck on Wad Manager, that means you did not remove the IOS stubs and install the cIOS properly.

[sevets]

Thanks Shoop - trying it this morning.